Dishwashers are among the most popular and desired kitchen appliances. They leave your dishes clean and sparkling with very little effort.
A typical dishwasher lasts between 7 to 12 years and is a worthwhile investment. It is also a nice way to apply for appliance insurance to cover your dishwasher from electrical or mechanical appliance breakdowns.
However, every appliance needs to be maintained. Dishwashers are no exception. Although there are times when you cannot control the situation, and you will have to call a repairman, it is important to have a basic understanding of what the issues are and how you can deal with them yourself.
Here is some information on common problems with dishwashers and how to fix them:
Dishes Are Not Being Washed Properly
The resultant detergent residue defeats the purpose of using a dishwasher. One possible reason for this problem is incorrect loading. An overloaded machine may not operate properly and must replace kitchenware in racks correctly.
Utensils such as knives may interfere with the spinning action, and loading plates with food residue can cause detergent build-up. Refer to your manufacturer’s manual for instructions on properly loading and cleaning your dishwasher.
Clean the detergent dispenser: The detergent dispenser may be clogged due to an old and sticky build-up of detergent. To fix this problem, clean out the container or replace the part.
Check the cleanliness of the dishwasher’s gasket, screen and filter. The spinning arms should not be clogged or dirty, as that can cause them to stop moving freely.
If they are dirty, remove them and clean them with a brush. Replace the gasket if it is loose. Keep cleaning the filter frequently, especially if you see soil on it.
To Avoid Spotting on Dishes
Use a rinse aid or water softener. If there is a white film on the dishes, it may be due to the minerals in hard water; use a detergent that softens the water.
After the above steps have been taken and there has been no improvement, run an empty cycle without dishes.
Load the dishes again and check if they come out cleaner.
The Dishwasher Doesn’t Fill Up
Dishwashers rely on water to carry out their cleaning duties, but sometimes they fail to do so. Here are a few reasons why.
The dishwasher door will not stay shut. A couple of possible causes for the issue are that the float switch is faulty or debris has jammed the timer. It prevents the dishwasher from filling with water.
A leaking faucet could also be a sign of a problem with the water inlet valve.
The dishwasher will not run. There may be a problem with the dishwasher power supply. Check the power outlet, fuse and wiring, and correct any errors in plugging.
If the motor does not start when the timer is activated, look at the timer.
The dishwasher continually fills with water. Overloading can occur due to a float switch, timer, and water inlet valve malfunctioning. A continuous filling can lead to wasted water.
Detergents that contain too many suds may overflow onto the floor because of the amount of foam they produce.
There has been a leak in the dishwasher. A door that does not seal properly can result in substantial damage. Check if the door closes properly, look for cracks in the body, and inspect the door gasket or seal for damage.
It might damage the hose or pump. Check the connection for any looseness and tighten it if necessary.
The Dishwasher is Not Operating Smoothly
When a dishwasher does not start, or when it starts and then stops, there are several possible causes.
Make sure the door closes completely and that no plates are misaligned. If the issue is due to a worn latch or a bad seal, you may need to replace these parts. Otherwise, it may be helpful to consult with a professional.
There is a problem with the supply of power to the dishwasher. Check the power outlet, fuse, wiring and proper plugging of the appliance. If you encounter these problems, look at the timer to determine if it is faulty.
It could be that the problem lies in the temperature of the water being too low, which prevents heat from reaching the dishwasher and allowing it to function properly. To fix this issue, increase the temperature water is heating up in your home.
Or else it could be that you have chosen a cycle with many processes common in new models of dishwashers. Check if all the parts like the timer, motor, thermostat or heating element are functioning properly.”
To ensure the dishes dry properly, clean the interior of your dishwasher. Also, check that the heating element and thermostat are working. Use liquid rinse aid and make sure you are using it correctly.
The Dishwasher Produces an Unpleasant Odour
If you notice a bad odour coming from your dishwasher, it could be because of one of the following causes.
The dishwasher may develop a foul odour if food particles have accumulated in the filter and screen at the bottom of the unit. Cleaning these parts always helps reduce odours. One way to minimize odours is to always pre-rinse dishes before loading them into the dishwasher.
Another possibility is that a plastic dish may have melted during the dishwasher cycle and released a chemical smell.
The Dishwasher Makes a Loud Clanking Sound
Dishwashers tend to make noise while they work, but if the sound seems to be increasing or changing, it could be due to a problem within the machine.
If the spray arm is hitting the dishes or racks, check to see if the dishes are ill-fitted or if the spray arm isn’t functioning correctly. Try to spin the arm while the power is off to test this.
The pump is at the bottom and is responsible for circulating water. Inspect it to see if a faulty pump could be causing the noise.
If the rings or seals in your dishwasher are loose or old, they might be causing it to rattle. You should replace the part.
You must carry out the above steps with care. Do not attempt to repair the dishwasher if it has been heavily damaged or if there are cracks in the machine. It is always best to take kitchen appliance insurance so that you can replace any damaged item.